Command Control Enhancement

TMCCtm Compatible controller designed for dummy engine operation…

 

Mini EX Features

 Full Featured Outputs
The Mini Commander EX has a full complement of outputs for supporting dummy engine applications.  Outputs feature support for directional lighting, coil couplers, ditch lights, and a re-configurable output for strobe, smoke, or cab lighting.  Additionally, serial signals are output  for sound systems.

   Soft Set Technologytm
The Mini Commander has exclusive “Soft Set Technology”; which allows you to change the unit ID (1 to 99) without installing a program/run switch!

   Multiple Command Set
Responds to ENG and TR commands.  Full train support for lash-ups, Forward Unit, Middle Unit, 
and End Unit assignment logic.  Lighting and coupler behavior based on assignment of unit.  Two outputs for LED ditch lighting (18ma maximum) and flash alternately on HORN activation.  Outputs sound system control signals, appropriately masking Non-Head Unit sound signals as required.

   Built in Antenna
The built in antenna will suffice for many applications.  A connector is provided for an extension antenna when the signal exposure to the built in antenna is not sufficient.

   Small Size
The footprint is only 1” x 2” in size.  This permits installation into many operating environments.
 

     Ordering Information Warranty Information

TMCC, R2LC, CAB-1, and RailSounds are registered trademarks of Lionel LLC
DCS is a registered trademark of MTH, Inc.