Locomotive Command Control Cruise Upgrade
Tach-less Installation !
The patented (#7,132,807) Cruise Commander with SMS* Technologytm is a breakthrough cruise control technology, unprecedented in 3-rail "O" Gauge. With the Cruise Commander Lite you get ultra-slow, constant speed, operation of your locos without complicated installations. Imagine how many locos that do not have flywheels that can now have cruise functionality! The Cruise Commander Lite is the same length (although slightly wider) than the standard "E" unit in Lionel locos. (Picture here)
While in operation, velocity information is monitored from the motor directly. If dual-motored, each motor is balanced to the other, synchronizing the motors for smooth operation. By using high current HEXFET drivers and operating at 20khz PWM on the motors, silent motor operation is attained. Additionally, lash-ups are possible when the locos are matched using the exclusive "nudge" feature.
Simple Tach-Less installation and operation
High Frequency (20khz) PWM for silent drive
DC motor capability (4 Amps)
Operates in command and conventional modes
CAB-1tm selectable 32 or 100(default) speed steps
Horn pulse to control modern-era and post-war horns / whistles
On-board micro-controller provides future enhancement capabilities
Splice-free connections make installation simple and quick
Uses R4LC to be fully compliant with TMCC standards
Only 2.25" L x 1.25" W x 0.8" H
32 speed step activation: AUX1 + 0 + AUX1 + 0 + BRAKE
100 speed step activation: AUX1 + 0 + AUX1 + 0 + BOOST
Cruise Off: AUX1 + 0 + AUX1 + BRAKE + 7 + BRAKE
Cruise On: AUX1 + 0 + AUX1 + BRAKE + 9 + BRAKE
*SMS - Speed Management System
TMCC, R4LC, CAB-1, and RailSounds are registered trademarks of Lionel LLC
DCS is a registered trademark of MTH, Inc.